产品详情
  • 产品名称:试验探针

  • 产品型号:P11.23
  • 产品厂商:其它品牌
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
试验探针/UL试验探针,用于测试电器产品的结构和外壳是否有良好防触电保护,以保证使用时不与带电部件发生意外接触。产品概述:符合UL1278图10.2标准要求。UL1278 Figure 10.2 Bar probe
详情介绍:
试验探针/UL试验探针/UL1278 Bar probe

用于测试电器产品的结构和外壳是否有良好防触电保护,以保证使用时不与带电部件发生意外接触。

产品概述:符合UL1278图10.2标准要求。UL1278 Figure 10.2 Bar probe
10.1.3 The acceptability of a guard is judged with respect to its general serviceability and with respect to  
the shape and size or both of the openings in it, in conjunction with the distance of the guard from the  
heating element and the other high-temperature parts mentioned in 10.1.1. Except as noted in 10.1.5, an  
opening in a guard is considered to be acceptable if, with the heater in any intended operating position,  
the following conditions are met:  
b) The shape and size of an opening which permits the vertically downward entrance of a bar  
probe 1/2 inch (12.7 mm) wide and 1/16 inch (1.6 mm) thick, see Figure 10.2, are such that a  
******** probe 1/16 inch thick and in the form of an isosceles triangle having a base of 2-3/4  
inches and an altitude of 5-1/2 inches, see Figure 10.3, is prevented from touching the heating  
element and the other high-temperature parts when the triangle probe is inserted, apex first, in  
any manner. The testing of an opening with the triangle probe applies also where the vertically  
downward insertion of the bar is prevented by the construction of the guard, the use of an  
additional barrier, or both, unless the vertically applied bar tends to be deflected outward – that  
is, away from the guard.  

试验探针
标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!