产品详情
  • 产品名称:7742 安规综合分析仪

  • 产品型号:7742 安规综合分析仪
  • 产品厂商:其它品牌
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
特点: 全新六合一功能包含 (ACW,DCW,IR,GB,LLT,RUN TEST) 超大型320×240 Graphic LCD 窗口 可于同一画面下完整的显示所有的设定参数或量测数值 测试功能确认设定(Verification) 自动提示讯息功能(Prompt) 快速放电线路 (专利:104990) 可设定校正日期-时间的预警功能 内建50组程序
详情介绍:

7742 Electrical Safety Compliance Analyzer
 
SPECIFICATIONS
MODEL 7742
AC WITHSTAND VOLTAGE
Range
Resolution
Accuracy
Output Voltage, ACV
0-5000
1
± (2% of setting + 5V)
Output Frequency50Hz/60Hz ±0.1%, User Selection
Output WaveformSine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation± (1% of output + 5V), From no load to full load
SETTINGS
HI and LO-Limit (Total), current, mA
0.000-9.999 (0=OFF)
0.001
± (2% of setting + 2 counts)
10.00-40.00
0.01
HI and LO-Limit (Real), current, mA
0.000-9.999
0.001
± (3% of setting + 50µA)
10.00-40.00
0.01
Ramp-Up Timer, second
0.1 - 999.9
0.1
± (0.1% + 0.05 sec)
Ramp-Down Timer, second
0.0-999.9
Dwell Timer, second
0, 0.4 - 999.9
(0=continuous)
Ground Continuity
Current: DC 0.1 A ± 0.01A, fixed
Max. Ground Resistance: 1 Ω ± 0.1Ω, fixed
Arc Detection
1 - 9 ranges (9 is the most sensitivity)
DC WITHSTAND VOLTAGE
Output Voltage, DCV
0 -5000
1
± (2% of setting + 5V)
DC Output Ripple
<4 %(5KV/20mA at Resistive Load)
SETTINGS
HI and LO-Limit, current, µA
0.0 - 999.9
0.1
± (2% of setting + 2 counts)
1000 - 20000
1
Ramp-Up Timer, second
0.4 - 999.9
0.1
± (0.1% + 0.05 sec)
Ramp-Down Timer, second
0.0, 1.0-999.9
Dwell Timer, second
0, 0.3 - 999.9
(0=continuous)
Ramp-HI, current
>20 mA peak maximum, ON/OFF User Selection
Charge-LO, current
0.0 - 350.0 µA DC or Auto Set
Discharge Time
≦ 200 msec
Maximum Capacitive Load
DC Mode
1µF < 1KV 0.08µF < 4KV
0.75µF < 2KV 0.04µF < 5KV
0.5µF < 3KV
Ground Continuity
Current: DC 0.1 A ± 0.01A, fixed
Max. Ground Resistance: 1 Ω ± 0.1Ω, fixed
Arc Detection
1 - 9 ranges (9 is the most sensitivity)
INSULATION RESISTANCE
Output Voltage, DCV
50 - 1000
1
± (2% of setting + 2 counts)
Charging Current
Maximum >20mApeak
SETTINGS
HI and LO-Limit, resistance, MΩ
0.05 - 99.99
(HI – Limit: 0 = OFF)
0.01
Same as Resistance MEASUREMENT Accuracy
100.0-999.9
0.1
1000-50000
1
± (0.1% + 0.05 sec)
Ramp-Up Timer, second
0.1 – 999.9
0.1
Ramp-Down Timer, second
0=OFF, 1.0-999.9
Delay Timer, second
0, 1.0 - 999.9
(0=continuous)
Charge-LO, current, µA
0.000 - 3.500 or Auto Set
GROUND BOND
Output AC Current, A(7742 )
1.00 – 40.00
0.01
± (2 % of setting + 2 counts)
Output Voltage, Vac
3.00 – 8.00
0.01
± (2 % of setting + 3 counts)
Output Frequency, Hz50Hz/60Hz ±0.1%, User Selection
Output Regulation± (1% of output + 0.02A), Within maximum load limits, and over input voltage range.
Maximum Loading1.00–10.00A/0–600mΩ, 10.01–30.00A/0–200mΩ, 30.01–40.00A/0–150mΩ
SETTINGS
Lead Resistance Offset, mΩ
0-200
1
1.00-2.99A,± (3 % of setting + 3 counts )
3.00 - 30A,± (2 % of setting + 2 counts )
3.00 - 40A,± (2 % of setting + 2 counts )
HI and LO-Limit Resistance, mΩ
0 – 150 (30.01-40.00A)
1
0 – 200 (10.01-30.00A)
0 – 600 (1-10.00A)
Dwell Timer, second
0, 0.5 - 999.9
(0 = continuous)
0.1
± (0.1% + 0.05 sec)
CONTINUITY TEST
Output Current, DC0.1A ± 0.01A, fixed
SETTINGS
Lead Resistance Offset, Ω
0.00-2.00
0.01
± (3% of setting+2 counts)
HI and LO-Limit, Resistance, Ω
0.00 – 10.00 (0=OFF)
Dwell Timer, second
0,0.3-999.9
0.1
± (0.1% + 0.05 sec)
Opt.734 (0 - 10kΩ)
Output CurrentDC 0.1A ± 0.01A,Max.
SETTINGS
Max-Lmt, Ω
0.00 – 9.99
0.01
± (1% of setting+5 counts)
10.0 – 99.9
0.1
± (1% of setting+2 counts)
100 – 999
1
1000 – 9999
1
Min-Lmt, Ω
0.00 – 9.99
0.01
± (1% of setting+5 counts)
10.0 – 99.9
0.1
± (1% of setting+2 counts)
100 – 999
1
1000 – 9999
1
Dwell Timer, second
0.0, 0.3 – 999.9
(0 = continuous)
0.1
± (0.1% + 0.05 sec)
Resistance Offset, Ω
0.00 – 2.00
0.01
± (1 % of reading + 5 counts)
MEASUREMENT
 
Range
Resolution
Accuracy
Voltage, KV(AC/DC)
0.00-5.00
0.01
± (1.5 % of reading +1 count)
Voltage, Vdc (IR only)
0-1000
1
± (1.5% of reading + 2 counts)
AC Current (Total), mA
0.000-3.500
0.001
± (2% of reading + 2 counts)
3.00-40.00
0.01
AC Current (Real), mA
0.000-9.999
0.001
± (3% of reading + 50?A)
10.00-40.00
0.01
All Ranges PF > 0.1 , V > 250VAC
DC Current, µA
0.0 - 350.0
0.1
± (2% of reading + 2 counts)
DC Current, mA
0.300 – 3.500
0.001
3.00-20.00
0.01
AC Current, A (G.B for 7742 only)
0.00-40.00
0.01
± (3 % of reading + 3 counts)
Resistance, MΩ (IR)
50-499V / 500-1000V
50 – 499V0.05–999.9, ±(7% of reading+2 counts)
0.050-1.999 / 0.050-9.999
0.001
500 – 1000V
2.00-19.99 / 0.050-9.999
0.01
0.10–999.9, ±(2% of reading+2 counts)
20.0-199.9 / 100.0-999.9
0.1
1000–9999, ±(5% of reading+2 counts)
200-50000 / 1000-50000
1
10000–50000, ±(15% of reading+2 counts)
Resistance, mΩ (GB)
0-600
1
1.00 – 2.99 A, ± (3 % of reading + 3 counts)
3.00 – 40.00 A, ± (2 % of reading + 2 counts)
Resistance, Ω (Continuity)
0.00-10.00
0.01
± (3 % of reading + 2 counts)
Resistance, Ω (Continuity) Opt.734
0.00 – 9.99
0.01
± (1% of reading+5 counts)
10.0 – 99.9
0.1
± (1% of reading+2 counts)
100 – 999
1
1000 – 9999
1
GENERAL
Input Voltage AC115/230Vac±15%, 50/60Hz ± 5%, Fuse 10A/250V Slow-Blow for 7742 Model
PLC Remote ControlInput : Test, Reset, Interlock, Recall File 1 through 10
Output:- Pass, Fail, Test-in-Process
Memory50 memories, 30 steps/memory
Graphic Display320 x 240 Monographic LCD, 9 ranges contrast setting
SafetyBuilt-in Smart GFI circuit,GFI trip current 450µA max, HV shut down speed: <1mS
InterfaceStandard RS232,Optional GPIB (IEEE-488.2),Multi-function Interface Card,Ethernet Card.
SecurityProgrammable password lockout capability to avoid unauthorized access to test set-up program.
Alarm Volume SettingRange: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
CalibrationSoftware and adjustments are made through the front panel. Automatic Calibration alert function to signal operator when re-calibration is due.
Environment0-40℃, 20-80%RH
Dimensions/Net Weight
430mm(W)×133mm(H)×500 mm(D)/30Kg for MODEL 7742
STANDARD ACCESSORIES
Power Cord(10A)
×1
Fuses
×2 (Including a spare contained in the fuse holder)
Interlock Disable Key(1505)
×1
Hipot Test Lead ,1.5m(1101)
×1
Ground Bond Test Lead 40A
,1.6m(1137)
×1
Ground Bond Return Lead 40A
,1.6m(1138)
×1
RS232 Link Cable 1.5m(1130)
×1
MATRIX SCANNER MODULE (Opt.736 for 7742)
High Voltage Rating
5KVAC/5KVDC
High Current Rating
40 A
Number of HV Channel
8
Number of HA Channel
8
RUN TEST MODULE (Opt.738,Opt.739 for 7742)
MEASUREMENT
 
Range
Resolution
Accuracy
Voltage, Vac
00.-277.0
0.1
± (1.5% of reading +2counts), 30.0-277.0V
Current, Aac
0.00-15.00
0.01
± (2.0% of reading + 2counts)
Power, Watts
0-4200
1
± (5% of reading + 3 counts)
Power, Factor
0.000-1.000
0.001
± (8% of reading + 2 counts)
Leakage Current, mA
0.00-10.00
0.01
± (2% of reading + 2 counts)
MD CircuitLeakage Current measuring resistance = 2KΩ±1%
Timer, second
0.0-999.9
0.1
± (0.1% of reading + 0.05 sec)
SETTINGS
HI and LO Limit AC Voltage, V
0.0-277.0
0.1
± (1.5% of setting + 0.2 V), 30.0-277V
HI and LO Limit AC Current, A
0.00-15.00
0.01
± (2.0% of setting + 2 counts)
HI and LO Limit AC Power, W
0 - 4200
1
± (5.0% of setting + 3 counts)
HI and LO Limit Power Factor
0.000-1.000
0.001
± (8% of setting + 2 counts)
HI and LO Limit Leakage Current
0.00-10.00, Hi-Limit 0=OFF
0.01
± (2% of setting + 2 counts)
Delay Time, second
0.2-999.9
0.1
± (0.1% + 0.05 sec)
Dwell Time, second
0, 0.1-999.9 (0=continuous)
Cold Resistance 0~10KΩ
DUT POWER
AC Voltage 0 - 277.0V, Single phase unblance, 0 - 15.0A maximum
Power Rating 4200 W maximum
DUT ProtectionShort circuit current 23A, <3 sec, Inrush Current 68A Response time 1m sec
STANDARD ACCESSORIES
Power Cord(15A)
×1
LLT Receptacle Adaptor Box 20A ,1.6m(1905)
×1
LINE LEAKAGE TEST MODULE (Opt.739 for 7742)
CURRENT MEASUREMENT
Frequency Range
DC-1MHz
Leakage Current Range (RMS)ResolutionAccuracy (DC-100KHz)Accuracy ( >100KHz to 1 MHz)
0.0µA - 999.9µA
0.1µA
±(1.5% of reading + 3counts)
±(5% of reading + 5µA)
1000µA - 6000µA
1µA
±(1.5% of reading + 3counts)
Leakage Current Range (Peak), Opt.739 OnlyResolutionAccuracy (DC-100KHz)Accuracy ( >100KHz to 1 MHz)
0.0µA - 999.9µA
0.1µA
±(10% of reading + 2µA)
±(10% of reading + 2µA)
1000µA - 6000µA
1µA
LINE VOLTAGE MEASUREMENT
Range0.0-277.0 VAC
Resolution0.1 V
Accuracy± (1.5% of reading +0.2V), 30.0-277.0V
DUT
DUT Input Power Rating0-277V,AC@ 15Aac max
DUT ProtectionShort circuit current 23A, <3 sec, Inrush Current 68A Response time 1m sec
SETTINGS
High/Low Limit, µARange 0.0 - 6000µA(0=OFF) , Resolution 0.1µA
Delay Time, secondRange 0, 1.0-999.9 (0=continuous), Resolution 0.1second
Compliance StandardsA UL544 Non Patient, UL484, IEC60598, UL1363
B UL544 Patient Care
C UL2601-1, IEC60601-1, EN60601-1
D UL1563
E UL60950, IEC60950, IEC61010-1, IEC60335-1, IEC60990 Fig4 U2
F IEC60990 Fig5 U3
G IEC60990 Fig3 U1
MD A - G componentsAccuracy: Resistance ± 1% Capacitor ± 5%
MD Voltage LimitMaximum 30V peak or 30VDC
STANDARD ACCESSORIES
Hipot Return Lead ,1.8m(1102)×2
*product specifications are subject to change without notice.

标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!